Chop saw
Porta bandsaw
4 ½ inch grinder
jig - a joint-type tubing cutter
MIG welder
angle finder type protractor
air chisel
Saws-all
½ inch drill
vise
C-clamps
jack stands
level
plumb bobs
tin snips
sheet metal break

Main Page-The Plan
Phase 2 -- Getting It Straight
Phase 3 -- Crossmember Installation
Phase 4 -- Ladder Bar Mounts
Phase 5 -- Installing the roll cage
Phase 6 -- Fitting the tires
Phase 7 -- Fabricating the wheel tubs
Phase 8 -- Painting and finishing
Phase 9 -- Finishing Up
Phase 10 - Subframe Replacement & Roll Cage Upgrade
The Budget

Click Here